Aluminum Scrap
Assorted clean aluminum scrap, ISRI code TABOR is included in this grade. |
Utensil Aluminum shall consist of aluminum sheet and sheet utensils including cooking pots, must be free of iron & foreign materials |
Aluminum Turnings shall consist of clean aluminum turnings, borings or grindings |
Aluminum Extrusion Scrap shall consist of clean aluminum profile extrusions including window & door frames |
Low Copper Aluminum Scrap shall consist of clean, uncoated aluminum plate, may include clips or punchings |
Aluminum Lithograph Sheet Scrap
Litho Sheets shall consist of clean aluminum lithograph sheets (plates), may contain 1100 or 3003 alloys. |
Cast Aluminum shall consist of clean aluminum castings. |
Clean Painted Aluminum shall consist of clean aluminum siding scrap and must be free of insulating materials |
Painted Aluminum Insulated Scrap Painted Aluminum (Insulated) shall consist of insulated, painted aluminum siding. |
Coated Aluminum shall consist of plastic/vinyl coated aluminum, may include venetian blinds |
Used Beverage Cans (UBC loose) Loose whole or flattened aluminum beverage cans, free from excessive dirt, liquid or other foreign materials. Equivalent to ISRI code TALAP or former code TALC. |
Shredded UBC shall consist of aluminum Used Beverage Cans that have been magnetically separated and shredded into uniform material handleable (pneumatic) state. |
Baled UBC shall consist of magnetically separated Used Beverage Cans that have been compressed into bales. |
Magnetically separated aluminum Used Beverage Cans compressed into briquettes with a minimum weight density of 50 lbs. per cubic foot. |
New Beverage Can Stock Scrap shall consist of new clean pre-consumer aluminum can stock (printed or unprinted) and may include clips or punching skeletons, & cans in various states of production but may not include whole cans from packaging lines. |
Remelt Aluminum Ingot shall consist of remelted aluminum scrap from a sweat furnace operation & poured into a uniform pigs or ingot blocks with a minimum weight of 25 lb., and a maximum weight of 75 lbs. |
Remelt Aluminum Sows shall consist of remelted aluminum scrap from a sweat furnace operation & poured into a uniform slabs or sow blocks with a minimum weight of 500 lb., and a maximum weight of 2,200 lbs. |
Mixed Irony Aluminum shall consist of assorted scrap aluminum contaminated with Iron, the aluminum content must be a minimum 70% and iron may not exceed 30% |
Low Grade Irony Aluminum Scrap
Low Grade Irony Aluminum shall consist of assorted scrap aluminum contaminated with Iron, the aluminum content must be a minimum 50% and iron may not exceed 50% |
Assorted automotive transmissions, free of torque converters. |
Aluminum Auto Rads shall consist of scrap aluminum automotive radiators, free from iron, |
Insulated Aluminum Wire shall include plastic insulated aluminum wire, must be free of iron. |
Supported Aluminum Cables shall include multi strand heavy gauge aluminum wire twisted around a single stand of steel wire. (Aluminium Conductors Steel Reinforced) |
Bare Aluminum Wire shall consist of clean aluminum wire free of iron or insulation. |
Clean, uncoated aluminum auto wheels of 356 alloy. Free from dirt, oil, and grease. Steel, valve stems and wheel weights have to be removed. |
Aluminum Nodules shall consist of clean aluminum wire recovered from a chopping operation and must be free of iron, copper & brass wire, aluminum hair wires and free of dirt, oil and foreign materials |
Alumifoil shall consist of clean, unalloyed aluminum foil and must be free of paper, plastics, food residues and other foreign materials. |
Paperbacked Alumifoil shall consist of aluminum foil laminated to paper or plastic |
Aluminum Dross shall consist of slags, drosses, skimmings and spilling from aluminum melting operations. |
Mixed Auto Fragments shall consist of sorted auto shredder fragments that have been magnetically separated to remove the majority of iron and steel and a secondary seperation has been performed (such as eddy current or spacific gravity classification) to consolidate the non-ferrous metals content. The content shall be a minimum of 50% aluminum and a minimum of 80% total non-ferous metals unless otherwise stated. ISRI grade Zorba may be included in this material. |
Other Aluminum Scrap shall consist of aluminum scrap that is not included in the other listed grades. |