Silver Recovery (Ag)
Silver Alloy Scrap shall consist of alloyed or remelted Silver scrap. |
Sterling Silverware Scrap shall consist of 92.5% Silver and 7.5% Copper. |
Silver Electrical Contacts shall consist of electrical contacts made of silver alloy. |
Silver Contacts (on Bus Bars) shall consist of electrical contacts made of silver alloy still connected to a copper alloy bus bar. |
Mercury/Silver Oxide Battery Scrap Mercury/Silver Oxide Battery Scrap may contain a variety of scrap batteries that contain mercury and silver oxide. An analysis of the content should be provided. |
Silver Plate Scrap shall consist of electroplated or roll plate silver materials, |
silver solder aloys very widly and should by sold on recovery or analysys basis, |
to meet compliance for the EU WEEE and RoHS directives manufactures have switched to a lead free solder which is tin based and commonly contains 3-4% silver and up to 1% copper |
Dental Amalgam Scrap shall consist of dental filling materials that are a silver alloy. |
Scrap X-Ray Film shall consist of silver content x-ray film, should be clean and free of paper or envelopes, (any material in envelopes should be specified and sold separately). |
Scrap Litho Film shall consist of silver content lithograph film, Should be free of paper or foreign materials. |
Scrap Litho Film shall consist of silver content lithograph film, may contain paper attachments (commonly known as GoldenRod) used in lithograph paste-ups. |
Scrap Green Film shall consist of un-developed, un-exposed silver content x-ray film, lithograph film or black & white photographic film |
Fixer Solutions shall consist of silver bearing photographic fixer solutions, generated from X-Ray, lithograph or black & white photography. This material should be properly packaged and labeled for transportation. |
Bleach Fix Solutions shall consist of silver bearing photographic fixer solutions, generated from color photography. This material should be properly packaged and labeled for transportation. |
Silver Flake shall consist of clean dry Silver flakes recovered by electroplating photographic fixer solutions. |
Flexible plastic substrate silver content circuit and contact points scrap recovered from keyboards & touch pads sometimes referred to as mylars |
Silver Content Scrap may consist of assorted materials that have a silver content. The ultimate cost to process these materials is based on the total weight of the shipment, so it is important to reduce the weight by removing any excess non-silver materials. |
Other Silver Scrap shall consist of any other Silver materials that are not included in the listed grades. |